McDATA OPENconnectors, Command Line Interface Manual

Page: 118 / 170

2
CLI Commands
McDATA OPENconnectors Command Line Interface USER MANUAL P/N 620-000134-300 2-86
VKRZVZLWFK
6\QWD[
switch
3XUSRVH
This command displays switch attributes.
3DUDPHWHUV
This command has no parameters.
&RPPDQG([DPSOH
Root> show switch
2XWSXW
The switch attributes data is displayed as a table that includes the
following properties.
State The state of the switch (for example, online or
offline).
BB Credit The BB credit as set in the
config.switch.bbCredit command. (This does
not apply to the Sphereon 4500.)
R_A_TOV The R_A_TOV as set in the config.switch.raTov
command.
E_D_TOV The E_D_TOV as set in the config.switch.edTov
command.
Preferred
Domain Id The domain ID as set in the
config.switch.domainId command.
Switch Priority The switch priority as set in the
config.switch.priority command.
Speed The switch speed as set in the
config.switch.speed command. (This does not
apply to the Sphereon 4500.)
Rerouting Delay The rerouting delay as set in the
config.switch.rerouteDelay command.
Operating Mode The operating mode (Open Systems or S/390).
This attribute cannot be configured through the
CLI.
Interop Mode The interoperability mode as set in the
config.switch.interopMode command.