McAfee SG310, Administration Manual

Page: 54 / 412

54 McAfee UTM Firewall 4.0.4 Administration Guide
Network Setup menu options
Connecting with a cable modem
Figure 45 ADSL Static Configuration
3
[Optional] Enter a descriptive name in the Connection Name field.
4
Enter the IP address provided by your ISP in the IP Address field.
5
Enter the IP address of the gateway provided by your ISP in the Subnet mask field.
6
Enter the IP address of the gateway provided by your ISP in the Gateway field.
7
Enter the DNS Address provided by your ISP in the DNS Server field. Separate multiple DNS addresses
with commas.
8
Select a classification from the Firewall Class list.
9
[Optional] Select the Preferred Gateway checkbox to enable load-balancing over this connection.
10
Click Finish. Additional configuration tabs appear, such as the VLAN configuration or Ethernet
configuration tab (depending on your connection type), Aliases, and IPv6. See
Ethernet Configuration tab ,
VLAN , Aliases tab , and Enabling IPv6 for a connection .
Connecting with a cable modem
Use this procedure to connect to the Internet using a cable Internet service. Cable Modem connections
have the interface firewall class of Internet.
Prerequisites: If you have not already done so, connect the appropriate network port of your UTM
Firewall appliance to your cable modem. Power on the cable modem and give it some time to initialize.
Ensure the Ethernet link LEDs are illuminated on both the UTM Firewall appliance (if applicable) and cable
modem.
1
From the Network Setup menu, click Network Setup. The Connections tab opens.
2
For the interface that you want to connect to your cable modem, select Cable Modem from the Change
Type list.
3
The Cable Model Connection Details page appears ( Figure 46 ). Select your cable ISP. If it is not BigPond
or @Home, select the Generic Cable Modem Provider option.