McAfee SG310, Administration Manual

Page: 109 / 412

McAfee UTM Firewall 4.0.4 Administration Guide 109
Network Setup menu options
Routes
Figure 109 USB Modem Details dialog
3
Enter the name of the Modem in the Modem Name field. The Modem Name is used to identify the modem
when setting up your PPP connection.
Note: Information for the following three fields is provided by the USB modem vendor.
4
Enter the USB Vendor ID for the modem in the Modem Vendor ID field. This is a four (4) digit
hexadecimal number.
5
Enter the USB Device ID for the modem in the Modem Product ID field. This is a four (4) digit
hexadecimal number.
6
[Conditional] If the modem provides more than one serial interface to the UTM Firewall device, enter the
interface to use for PPP connections in the Serial Interface to use field.
7
[Conditional] If the USB modem is a GPRS or 3G modem, enter the APN command string and SIM card
PIN code command string for the modem. When entering the command strings, be sure to replace the
actual value to be sent with ‘
%s
’.
Routes
You can configure static and policy routes for the appliance.
Advanced users can enable route management for RIP, BGP, and OSPF protocols. For more information,
see:
•
Example: Configuring RIP Route Management
• Example: OSPF
• Example: BGP
Creating a static route
Use this procedure to add static routes for the UTM Firewall appliance. These routes are additional to those
created automatically by the configuration scripts of the appliance.