McAfee SG310, Administration Manual

Page: 313 / 412

McAfee UTM Firewall 4.0.4 Administration Guide 313
VPN menu features
Port tunnels
Figure 318 HTTP Tunnel Client page
3
Enter a descriptive name for the tunnel client in the Name field.
• Can be one or more characters of any type
4
Ensure the Enable checkbox is selected. It is enabled by default.
5
In the Data Port field, enter the TCP port on which to listen for connections from local hosts to forward
across the tunnel. This must match the TCP used by the application client.
• Range: an integer value from 1-65535
6
Enter the publicly accessible IP address of the remote tunnel server in the Tunnel Server field.
7
Enter the TCP port on which the tunnel server is listening for connections in the Tunnel Port field. This
must match the tunnel server’s Tunnel Port.
• Default: 80
• Range: an integer value from 1-65535
8
[Optional] Specify the Content Length to use in HTTP PUT requests.
• Default: 102400
• Can be an integer value equal to or greater than 1
9
[Optional] To force Content Length for all requests, select the Strict Content Length checkbox. This
setting always writes content-length bytes in requests.
10
To specify a maximum age for connections, after which the connection is closed, enter a value in seconds
in the Maximum Age field.
• Default: 300
• Can be an integer value equal to or greater than 1