McAfee MTP09EMB1RAA - Total Protection 2009, User Manual, Page: 142 / 274

140 McAfee Total Protection
Edit sites in your whitelist
If you added a Web site to the whitelist and the Web site address
changes, you can always update it.
1
Open the Phishing Protection pane.
1. On the SecurityCenter Home pane, click Internet &
Network.
2. In the Internet & Network information area, click
Configure .
2
On the Phishing Protection pane, click Advanced .
3
Under Whitelist, select the Web site you want to update, and
then click Edit.
4
Edit the Web site address, and then click OK .
Remove a Web site from the whitelist
If you added a Web site to the whitelist because you wanted to
access it, but now you want to filter it, remove it from the
whitelist.
1
Open the Phishing Protection pane.
1. On the SecurityCenter Home pane, click Internet &
Network.
2. In the Internet & Network information area, click
Configure .
2
On the Phishing Protection pane, click Advanced .
3
Under Whitelist, select the Web site you want to remove, and
then click Remove.
Disable phishing protection
If you already have phishing software that is not from McAfee and
there is a conflict, you can disable Anti-Spam phishing
protection.
1
On the SecurityCenter Home pane, click Internet &
Network.
2
In the Internet & Network information area, click Configure .
3
Under Phishing protection is enabled , click Off .
Tip: When you are done, remember to click On under Phishing
protection is disabled so that you are protected against
fraudulent Web sites.