45
Operation
Deleting All Scenes
When deleting all scenes, they are permanently removed and can not be recovered anymore.
• Switch the light control device off.
• Press and hold the BANK (9) button with the arrow downwards and the PROGRAM/PAUSE (3) button while
switching the light control device back on.
• Keep the buttons pressed until all LEDs light up.
• All scenes are deleted.
Sound to Light Control
Sound to light control will only work when the effect light device receives a music signal either through
the integrated microphone or the AUDIO port (20). When a music signal is received, the device will
control the light effects according to the music.
• Press the MUSIC/BANK COPY button (4) to switch sound to light control on or off.
• When sound to light control is activated, the MUSIC display appears in the mode display (8).
Data Transfer between Two DMX Light Control Devices
The light control device data can be transferred directly to another light control device of the same build through a
DMX connection. If you have several of these light control devices and want to use the same settings and
programmes on all devices, they only need to be programmed once.
Data transfer is only possible between devices of the same build.
• Switch off both devices.
• Connect the DMX OUT port (23) of the programmed device to the DMX IN port (24) of the unprogrammed device.
• Press and hold the SCANNER 2 and 3 buttons (1) and the SCENE 1 (2) button at the programmed device and
switch on the device.
• The display (6) shows TRANSMIT.
• Press and hold the SCANNER 8 and 9 buttons (1) and the SCENE 2 (2) button at the unprogrammed device and
switch on the device.
• The display (6) shows RECEIVE.
• Press and hold the SCENE 7 and 8 buttons (2).
• Data transfer starts.
• After completion of data transfer, both light control devices are back in manual mode.
