38
Operation
Fader Reversal
With this function, you can reverse the fader path for each channel fader.
• Press the FINE (15) and MODE (14) buttons at once until the CHASE COMBINE LED below the display (6) lights
up.
• Select the desired light effect with the respective SCANNER (1) button. The corresponding LED must flash.
• First use the FADE TIME (16) fader to select the desired light control device channel to be reversed. The channel
is indicated on the display (6).
• Then use the SPEED fader (17) to select Y or N. Y means that the channel fader selected is inverted, N means
that it is not inverted.
• Press the FINE (15) and MODE (14) buttons at once twice to save the setting.
Manual Operation
For this operating mode, the effect lights are manually controlled through the channel fader (18).
The settings in this operating mode cannot be saved.
• Select the desired light effect with the respective SCANNER (1) button. The corresponding LED must flash.
• Set the desired cannel values through the respective channel faders (18).
• Press the PAGE SELECT A/B (19) button to control channels 1-8 (LED A is lit), channels 9-16 (LED B is lit) or
channels 1-8 and 9-16 at once (LED A and B are lit).
• Press the TAP DISPLAY button (10) to display the DMX or percentage values in the display (6).
