47
Handling
• Never operate the device when the housing is damaged or not covered properly.
• Never plug the power plug into a mains socket immediately after the device has been taken from a cold to a warm
environment. The resulting condensation could destroy the device.
Allow the device to reach room temperature before connecting it. Wait until the condensation water has
evaporated.
• Never touch the wall power supply when your hands are wet.
• Never disconnect power plugs from the mains socket by pulling at the cable. Always pull it out of the mains socket
holding it by the contact surfaces provided for this purpose.
• Unplug the power supply if you do not use the device for some time.
• For safety reasons, disconnect the power unit from the mains socket in case of an electrical storm.
• Do not cover the device to ensure sufficient ventilation. In addition, air circulation must not be obstructed by any
objects such as magazines, tablecloths, curtains etc.
Maintenance
Regularly check the safety of the light control device, e.g. for damage to the power unit or the housing.
If you have reason to believe that the device can no longer be operated safely, disconnect it immediately and make
sure it is not unintentionally operated. Pull the power unit out of the socket.
It can be assumed that safe operation is no longer possible if:
• there is visible damage to the device or to the power unit,
• the device no longer functions
• the device has been stored for a long time under unfavourable conditions or
• after exposure to extraordinary stress caused by transport
