!!
3
2!*((
• Check network status and if network port is correctly connected.
• Check if access to Mbox is blocked by firewall, etc.
• In case IP is not known, refer to 2) below.
• In case network setup is incorrect, refer to 3) below.
• If not falling within the purview of 2) and 3) below, check for abnormalities in LED operation by checking LED status at
the front of equipment.
• Request technical support if LED does not operate normally.
2!( !) *(
• Execute installer.exe (Mbox installer) in installation CD.
• Continuously press [Next] button until moving to Mbox search screen.
• If equipment is defected in Mbox search screen, Mbox can be accessed by using IP of the equipment detected.
• Refer to manual for detailed operations of Installer.exe.
32!*((
• Copy gbs_patch.bin file located in System_Init directory of installation CD to USB stick.
• Network setup is automatically initialized when connecting USB stick to Mbox.
• For the initialized network IP, refer to the section of network setting in manual.
42! (
• In general, system operation may stop if taking out and reinserting hard disk during system operation.
• System must be reboot in this case.
Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open
the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the
system for repair.
