MECHANICAL
01-10–82
Tightening torque
Cylinder Head Cover Assembly Note
Caution
•
To assure the sealing performance of the cylinder head cover, be careful of the following:
—
Verify that the cylinder head cover gasket is inserted into the cylinder head cover groove and
install the cylinder head cover.
—
Completely clean and remove any oil, dirt, sealant or other foreign matter from the seal
surface.
•
To prevent silicone sealant from hardening, adhere the cylinder head cover and the cylinder head
within 10 min. after silicone sealant is applied. Tighten the installation bolts completely soon after
adhering.
1. Insert a new cylinder head cover gasket into the cylinder head cover groove.
Installation position
Tightening torque
1
9—12 N·m {92—122 kgf·cm, 80—106 in·lbf}
2, 3
8.0—9.0 N·m {82—91 kgf·cm, 71—79 in·lbf}
1A36-1U-12L.book 82 ページ ２０１２年１２月１０日 月曜日 午前９時２５分
