MECHANICAL
01-10–76
5. Apply silicone sealant to the areas shown in the
figure.
Caution
•
Apply the silicone sealant so that it goes
into the cylinder head gasket.
6. Install the engine front cover to the engine.
Note
•
Temporarily install an appropriate bolt to the
drive belt auto tensioner installation bolt hole
to prevent:
—
A silicone sealant adhesion malfunction
in the drive belt auto tensioner
installation bolt hole.
—
A bolt mis-installation due to silicone
sealant hardening.
7. Prepare an appropriate
M8 X 1.25
bolt (length
40
mm {1.6 in}
).
Caution
•
For the number 10 bolt of the tightening
order, install the bolts with new washer.
SEALANT
SEALANT
CYLINDER BLOCK
CYLINDER HEAD
CYLINDER
HEAD
GASKET
SEALANT
SEALANT
A
VIEW FROM A
am3uuw00008866
DRIVE BELT AUTO
TENSIONER
INSTALLATION BOLT HOLE
am3uuw00008867
1A36-1U-12L.book 76 ページ ２０１２年１２月１０日 月曜日 午前９時２５分
