MECHANICAL
01-10–50
Oil Pump Assembly Note
1. Install the oil pump using the following procedure:
(1) Temporarily tighten the
three bolts
shown in
the figure.
(2) Tighten the
two bolts
shown in the figure to
the specified torque.
Note
•
The tightening order for the two bolts is
optional.
Tightening torque
20—26 N·m {2.1—2.6 kgf·m, 15—19 ft·lbf}
(3) Finally, tighten the bolt shown in the figure to
the specified torque.
Tightening torque
20—26 N·m {2.1—2.6 kgf·m, 15—19 ft·lbf}
OIL PUMP
BOLT
BOLT
BOLT
ENGINE FRONT
bpe1ze00000053
OIL PUMP
BOLT
BOLT
ENGINE FRONT
bpe1ze00000054
OIL PUMP
BOLT
ENGINE FRONT
bpe1ze00000055
1A36-1U-12L.book 50 ページ ２０１２年１２月１０日 月曜日 午前９時２５分
