MECHANICAL
01-10–23
01-10
Pilot Bearing Disassembly Note
Note
•
The pilot bearing does not need to be removed unless you are replacing it.
1. Use the
SST
to remove the pilot bearing.
Connecting Rod Cap Disassembly Note
1. Before removing the connecting rod cap, inspect
the connecting rod side clearance. (See 01-10-35
CONNECTING ROD CLEARANCE
INSPECTION.)
2. The removed connecting rod caps are to be kept
so that they can be assembled to the same
positions and in the direction as before removal.
Connecting Rod Bearing Disassembly Note
1. The removed connecting rod bearings are to be kept so that they can be assembled to the same positions and
in the direction as before removal.
Piston, Connecting Rod Disassembly Note
1. Before removing the piston and connecting rod, remove the carbon in the cylinder.
2. Before removing the piston and connecting rod, inspect the oil clearance at the large end of the connecting rod.
(See 01-10-35 CONNECTING ROD CLEARANCE INSPECTION.)
13
Crankshaft
(See 01-10-25 Crankshaft Disassembly Note.)
14
Plate
15
Upper main bearing
(See 01-10-25 Thrust Bearing And Main Bearing
Disassembly Note.)
16
Thrust bearing
(See 01-10-25 Thrust Bearing And Main Bearing
Disassembly Note.)
17
Oil jet valve
18
Upper cylinder block
49 1285 071
bpe2ue00000021
bp31je00000044
1A36-1U-12L.book 23 ページ ２０１２年１２月１０日 月曜日 午前９時２５分
