MECHANICAL
01-10–81
01-10
Water Pump Pulley Assembly Note
Caution
•
Be careful not to damage the belt groove and surface of the water pump pulley when using tools,
otherwise it will cause wear, breakage, abnormal noise of the drive belt (stretch belt), damage to
the pulley, and rust.
1. Install the water pump pulley to the water pump and temporarily tighten the bolt.
2. Align the water pump pulley hole with the water
pump hole as shown in the figure.
3. Insert an appropriate bolt (length
70 mm {2.8 in}
)
into the water pump hole shown in the figure and
lock the water pump pulley against rotation.
4. Completely tighten the water pump pulley bolt to
the specified torque.
Tightening torque
8—11 N·m {82—112 kgf·cm, 71—97 in·lbf}
5. Remove the bolt used for locking the water pump
pulley against rotation.
Oil Shower Pipe Assembly Note
1. Install the oil shower pipe in the order shown in
the figure.
WATER PUMP PULLEY
WATER PUMP
HOLE
HOLE
bpe2ue00000081
WATER PUMP PULLEY
BOLT
am3uuw00008874
2
3
2
3
1
1
OIL SHOWER
PIPE
am3zzw00012759
1A36-1U-12L.book 81 ページ ２０１２年１２月１０日 月曜日 午前９時２５分
