MECHANICAL
01-10–80
Front Oil Seal Assembly Note
1. Apply clean engine oil to the inner surface of a new front oil seal.
2. Insert the front oil seal into the engine front cover by hand.
3. Tap the oil seal in evenly using the
SST
and a
hammer.
Front oil seal press on amount
0—0.5 mm {0—0.019 in}
Crankshaft Pulley Lock Bolt Assembly Note
1. Hold the crankshaft using the
SST
.
2. Tighten the crankshaft pulley lock bolt in the order
shown in the following two steps.
Tightening procedure
Step 1: 90—110 N·m {9.2—11 kgf·m, 67—81
ft·lbf}
Step 2: 55—65
°
HAMMER
49 G028 205
ENGINE FRONT COVER
VIEW FROM A
A
49 G028 205
am3uuw00008830
FRONT OIL SEAL
0—0.5 mm
{0—0.019 in}
ENGINE FRONT
COVER
FRONT OIL SEAL
SECTION B-B
B
B
am3uuw00008831
49 E011 1A0
bpe1ze00000069
1A36-1U-12L.book 80 ページ ２０１２年１２月１０日 月曜日 午前９時２５分
