Mazda 3 Sport 2017, Manual

Page: 257 / 610

4–127
When Driving
i-ACTIVSENSE
NOTE
     
If you have set the lane departure warning sound to the beep sound/rumble sound
*1
setting, the warning sound may not be heard depending on the surrounding noise
conditions.
     
If you have set the lane departure warning system to the steering wheel vibrations setting,
the vibration may not be felt depending on the road surface conditions.
     
When the setting for the steering operation assist is changed to operational, the warnings
can be set to activate/not activate. (When the setting for the steering operation assist is
changed to non-operational, the warnings cannot be set to not activate.)
 
Refer to Setting Change (Personalization Features) on page 9-12 .
     
The Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) can be
changed to the following settings regardless of whether the steering operation assist has
been set to operational/non-operational. Always check the setting status when driving the
vehicle and make setting changes if necessary.
 
Refer to Setting Change (Personalization Features) on page 9-12 .
     
Steering wheel vibration: Strong/weak
     
Warning sound volume
     
Types of warnings (steering wheel vibration/beep sound/rumble sound
*1
)
*1 A rumble strip is a series of grooves in the road pavement surface positioned at speci
fi
c
intervals, and when the vehicle passes over it a vibration and rumble sound is produced
which alerts the driver that the vehicle is departing from the lane.
 
The rumble sound is a reproduction of the sound which occurs when a vehicle passes over
a rumble strip.
Rumble
Groove
Mazda3_8FL6-EA-16F_Edition3.indb 127 2016/12/09 16:54:16