Mazda 3 Sport 2017, Manual

Page: 204 / 610

4–74
When Driving
i-ELOOP
i-ELOOP Indicator Light/Control
Status Display
The driver is noti
fi
ed of the i-ELOOP
power generating status and the vehicle
conditions by the i-ELOOP indicator light
and the control status display.
i-ELOOP Indicator Light
Illuminated (vehicle without type B
audio)
The light turns on during power
generation.
Flashing
If the engine is started after the vehicle has
not been driven for a long period of time,
the i-ELOOP indicator light may
fl
ash.
Leave the engine idling and wait until the
indicator light turns off.
NOTE
     
The beep will sound if the vehicle is
driven while the i-ELOOP indicator
light is
fl
ashing. In addition, if you
turn the steering wheel while the light
is
fl
ashing, it will feel heavier than
normal, but this does not indicate an
abnormality. Stop the vehicle in a safe
location with the engine running and do
not attempt to turn the steering wheel.
The steering operation will return to
normal after the i-ELOOP indicator
light stops
fl
ashing.
     
(Vehicles with type B audio)
 
A noti
fi
cation is displayed in the center
display and the i-ELOOP indicator light
fl
ashes at the same time.
 
Refer to Warning Message Indicated on
Display on page 7-37 .
Control status display (vehicles with
type B audio)
The i-ELOOP power generating status is
displayed in the center display.
Refer to Control Status Display on page
4-77 .
Mazda3_8FL6-EA-16F_Edition3.indb 74 2016/12/09 16:54:03