Mazda 3 Sport 2017, Manual

Page: 83 / 610

3–7
Before Driving
Keys
NOTE
     
The system can be set to unlock all
doors by performing a single operation.
 
Refer to Personalization Features on
page 9-12 .
 
Use the following procedure to change
the setting.
1. Switch the ignition off and close all
of the doors and the liftgate/trunk
lid.
2. Open the driver's door.
3. Within 30 seconds of opening the
driver's door, press and hold the
UNLOCK button on the key for 5
seconds or longer (the sound of
the doors locking/unlocking can be
heard).
After this, the system switches the
setting each time the UNLOCK
button is pressed (the sound of the
doors locking/unlocking can be
heard).
4. The setting change is completed by
doing any one of the following:
     
Switching the ignition to ACC or
ON.
     
Closing the driver's door.
     
Opening the liftgate/trunk lid.
     
Not operating the key for 10
seconds.
     
Pressing any button except the
UNLOCK button on the key.
     
Pressing a request switch.
       
(Auto re-lock function)
 
After unlocking with the key, all
doors and the liftgate/trunk lid will
automatically lock if any of the
following operations are not performed
within about 60 seconds. If your
vehicle has a theft-deterrent system,
the hazard warning lights will
fl
ash for
con
fi
rmation.
 
The time required for the doors to lock
automatically can be changed.
 
Refer to Personalization Features on
page 9-12 .
     
A door or the liftgate/trunk lid is
opened.
     
The ignition is switched to any
position other than off.
     
(With theft-deterrent system)
 
When the doors are unlocked by
pressing the unlock button on the key
while the theft-deterrent system is
turned off, the hazard warning lights
will
fl
ash twice to indicate that the
system is turned off.
Mazda3_8FL6-EA-16F_Edition3.indb 7 2016/12/09 16:53:31