Mazda 3 Sport 2017, Manual

Page: 600 / 610

9–18
Speci
fi
cations
Personalization Features
Item Feature
Factory
Setting
Available
Settings
Settings
Change
Method
Active Driving Display (page 4-21 )
Display
Setting can be changed so that the Active
Driving Display is not displayed.
On On/Off C —
The display height (up/down position) can be
changed.
0
13 steps up/
down from
initial setting
(total: 27 steps)
C —
The method for adjusting the display
brightness (automatically/manually) can be
changed.
AUTO AUTO/MAN. C —
The standard brightness while automatic
adjustment is selected can be changed using
the brightness adjustment.
0
2 steps up/
down from
initial setting
(total: 5 steps)
C —
The standard brightness while manual
adjustment is selected can be changed using
the brightness adjustment.
0
20 steps up/
down from
initial setting
(total: 41 steps)
C —
Navigation
guidance
The display information can be changed.
Lane
Guidance
& Turn by
Turn
At Maneuver/
Lane Guidance
& Turn by
Turn/
OFF
C —
*1 Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda recommends
that these systems remain On.
*2 Only the volume of the warning beep during Blind Spot Monitoring (BSM) operation can be changed. The
volume of the warning beep during Rear Cross Traf
fi
c Alert (RCTA) operation cannot be changed.
*3 This system functions only when the navigation system is functioning.
*4 If the auto-wiper control is set to Off, the wiper lever
position is set to intermittent operation.
*5 If the setting is changed to Off, the following operation is performed according to the headlight switch position:

At position: Headlights turn off immediately after the ignition is switched off.

At any position other than : Headlights on/off conditions vary according to the headlight switch
position. Refer to Headlights on page 4-43 .
*6 When set to Off, the lights-on reminder is operable.
*7 The lights-on reminder settings can be changed at anytime, however, the lights-on reminder only operates when
the auto headlight function is set to Off. Refer to Lights-On Reminder on page 7-39 .
*8 The operation may stop in 15 minutes due to the effect of the outside temperature even if the operation time of
the rear window defogger has been changed to Continuous.
*9 Available only in display from the center display.
Mazda3_8FL6-EA-16F_Edition3.indb 18 2016/12/09 16:56:04