Mazda 3 2015, Owner'S Manual

Page: 580 / 589

9–15
Specifi cations
Personalization Features
Item Feature Factory Setting Available Settings
Fuel economy
resetting procedure
Setting can be changed so that the fuel
economy reset is linked with the trip meter
reset.
Refer to Fuel Economy Monitor on page 4-85 .
Off On/Off
Active driving
display
Setting can be changed so that the Turn-by-
Turn (TBT) of the Active driving display is not
displayed.
Refer to Active driving display on page 4-18 .
On On/Off
*1 If the auto-wiper control is set to Off, the wiper lever position is set to intermittent operation.
*2 If the setting is changed to Off, the following operation is performed according to the headlight switch position:
y
At position: Headlights turn off immediately after the ignition is switched off.
y
At any position other than : Headlights do not turn off after the ignition is switched off.
*3 When set to Off, the lights-on reminder is operable.
*4 Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda recommends
that these systems remain On.
*5 The setting of the lights-on reminder can be changed with the time setting of auto headlight off function set to
Off. Refer to Lights-On Reminder on page 7-35 .
*6 Only the volume of the warning beep during Blind Spot Monitoring (BSM) operation can be changed. The
volume of the warning beep during Rear Cross Traffi c Alert (RCTA) operation cannot be changed.
*7 For vehicles with an audio system other than the on-screen function type, the warning sound cannot be changed.
The warning sound is only a beep.
*8 Available only in display from the center display.
Mazda3̲8DX6-EA-14F̲Edition1.indb 15 Mazda3̲8DX6-EA-14F̲Edition1.indb 15 2014/05/22 9:16:08 2014/05/22 9:16:08