Mazda 3 2015, Owner'S Manual

Page: 434 / 589

6–33
Maintenance and Care
Owner Maintenance
Wiper Blades
CAUTION
¾
Hot waxes applied by automatic car
washers have been known to aff ect the
wiper's ability to clean windows.
¾
To prevent damage to the wiper blades,
do not use gasoline, kerosene, paint
thinner, or other solvents on or near
them.
¾
When the wiper lever is in the AUTO
position and the ignition is switched ON,
the wipers may move automatically in
the following cases:
¾
If the windshield above the rain
sensor is touched.
¾
If the windshield above the rain
sensor is wiped with a cloth.
¾
If the windshield is struck with a hand
or other object.
¾
If the rain sensor is struck with a hand
or other object from inside the vehicle.
Be careful not to pinch hands or fi ngers
as it may cause injury, or damage the
wipers. When washing or servicing the
vehicle, make sure the wiper lever is in
the OFF position.
Contamination of either the windshield or
the blades with foreign matter can reduce
wiper effectiveness. Common sources are
insects, tree sap, and hot wax treatments
used by some commercial car washes.
If the blades are not wiping properly,
clean the window and blades with a good
cleaner or mild detergent; then rinse
thoroughly with clean water. Repeat if
necessary.
Replacing Windshield Wiper
Blades
When the wipers no longer clean well, the
blades are probably worn or cracked.
Replace them.
CAUTION
To prevent damage to the wiper arms
and other components, do not try to
sweep the wiper arm by hand.
NOTE
To prevent damage to the wiper arm
blades when raising both the driver and
passenger side wiper arms, raise the
driver side wiper arm fi rst. Conversely,
when setting down the wiper arms, set the
passenger side wiper arm down fi rst.
1. Raise the wiper arm.
2. Open the clip and slide the blade
assembly in the direction of the arrow.
Mazda3̲8DX6-EA-14F̲Edition1.indb 33 Mazda3̲8DX6-EA-14F̲Edition1.indb 33 2014/05/22 9:15:40 2014/05/22 9:15:40