Mazda 3 2015, Owner'S Manual

Page: 89 / 589

3–14
Before Driving
Doors and Locks
y
All doors and the liftgate cannot be
locked when any door or the liftgate is
open.
y
It may require a few seconds for the
doors to unlock after the request switch
is pressed.
y
A beep sound is heard for confi rmation
when the doors and the liftgate are
locked/unlocked using the request
switch. If you prefer, the beep sound can
be turned off.
The volume of the beep sound can also
be changed. Refer to Personalization
Features on page 9-12 .
Use the following procedure to change
the setting.
1. Switch the ignition off and close all
of the doors and the liftgate/trunk
lid.
2. Open the driver's door.
3. Within 30 seconds of opening the
driver's door, press and hold the
LOCK button on the key for 5
seconds or longer.
All of the doors and the liftgate lock
and the beep sound activates at the
currently set volume. (If the beep
sound is currently set to not activate,
it will not activate.) The setting
changes each time the LOCK button
on the key is pressed and the beep
sound activates at the set volume. (If
the beep sound has been set to not
activate, it will not activate.)
4. The setting change is completed by
doing any one of the following:
y
Switching the ignition to ACC or
ON.
y
Closing the driver's door.
y
Opening the liftgate/trunk lid.
y
Not operating the key for 10
seconds.
y
Pressing any button except the
LOCK button on the key.
y
Pressing a request switch.
y
(With theft-deterrent system)
The hazard warning lights fl ash when
the theft-deterrent system is armed or
turned off.
Refer to Theft-Deterrent System on page
3-42 .
Mazda3̲8DX6-EA-14F̲Edition1.indb 14 Mazda3̲8DX6-EA-14F̲Edition1.indb 14 2014/05/22 9:14:27 2014/05/22 9:14:27