Mazda 3 2015, Owner'S Manual

Page: 340 / 589

5–81
Interior Features
Bluetooth
®
9. Using the device, perform a search
for the Bluetooth ® device (Peripheral
device).
NOTE
For the operation of the device, refer to its
instruction manual.
10. Select “Mazda” from the device list
searched by the device.
11. Input the 4-digit pairing code to the
device.
12.
Prompt:
“Please say the name of the
device after the beep.”
13.
Say:
[Beep] “XXXX - - -” (Say a
“device tag”, an arbitrary name for the
device.) Example: “Stan's device.”
NOTE
Say a paired “device tag” within 10
seconds.
If more than two devices are to be paired,
they cannot be paired with the same or
similar “device tag”.
14.
Prompt:
“XXXXXX - - - (Ex. “Stan's
device”) (Device tag). Is this correct?”
15.
Say:
[Beep] “Yes”
16. Prompt: “Pairing complete”
After a device is registered, the system
automatically identifi es the device. By
activating Bluetooth
®
Hands-Free again,
or by activating Bluetooth ® Hands-Free
fi rst after switching the ignition from
OFF to ACC, the system reads out a voice
guidance, “XXXXXX - - - (Ex. “Stan's
device”) (Device tag) is connected”.
NOTE
y
When the pairing is completed, the
symbol is displayed.
y
Some Bluetooth
®
audio devices need a
certain amount of time before the
symbol is displayed.
y
Device registration can also be done by
operating the audio unit.
y
Depending on the device, the
registration status may be lost after a
certain period of time. If this occurs,
repeat the entire process from Step 1.
Registered device read-out
Bluetooth
®
Hands-Free can read-out the
devices registered to its system.
NOTE
Do this function only when parked. It is
too distracting to attempt while driving
and you may make too many errors to be
effective.
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] “Setup”
3.
Prompt:
“Select one of the following:
Pairing options, confi rmation prompts,
language, passcode, select phone or
select music player.”
4.
Say:
[Beep] “Pairing options”
5.
Prompt:
“Select one of the following:
Pair, Edit, Delete, List, or Set Pairing
Code”
6. Say: [Beep] “List”
Mazda3̲8DX6-EA-14F̲Edition1.indb 81 Mazda3̲8DX6-EA-14F̲Edition1.indb 81 2014/05/22 9:15:21 2014/05/22 9:15:21