6–54
Maintenance and Care
Owner Maintenance
3. Turn the wing bolt and jack screw
counterclockwise.
4. Remove the jack
5. Turn the socket and bulb assembly
counterclockwise and remove it.
6. Disconnect the bulb from the socket.
Rear turn signal lights
Brake lights/Taillights/Rear side-
marker lights (Bulb type)
7. Install the new bulb.
8. Insert the wing bolt into the jack with
the jack screw pointing to the down
and turn the wing bolt clockwise to
temporarily tighten it.
9. Turn the jack screw in the direction
shown in the fi gure.
10. Turn the wing bolt completely to secure
the jack.
NOTE
If the jack is not completely secured, it
could rattle while driving. Make sure the
jack screw is suffi ciently tightened.
Mazda3̲8DX6-EA-14F̲Edition1.indb 54
Mazda3̲8DX6-EA-14F̲Edition1.indb 54
2014/05/22 9:15:45
2014/05/22 9:15:45
Summary of Contents for 3 2015
