Fig. 4-1
1. Plug 10-pin connector into back of EC mirror. (Fig. 4-1)
4
Route EC Mirror Harness to Vehicle Power
NOTE
!
Slide harness sleeve as close to mirror connector as possible.
Wire
Retention
Clip
Fig. 4-2
2. Route EC harness from mirror to headliner.
a) Route power harness toward passenger side
of mirror.
(Fig. 4-2)
b) Attach retaining clip to channel mount tubing of
mirror, ensuring clip opening is facing driver side.
(Fig. 4-2)
Fig. 4-3
c) Gain access to overhead by gently pulling down
on headliner and route EC harness from mirror
into vehicle overhead.
(Fig. 4-3)
CAUTION
!
Be careful not to crease headliner.
3. Route EC harness to driver-side A-pillar.
a) Route power harness between vehicle headliner
and roof to top of driver-side A-pillar area.
(Fig. 4-4
)
Fig. 4-4
Page 5 of 17
9/1/2010
