Page 16 of 17
9/1/2010
BASIC INSTALLATION TROUBLE-SHOOTING
CONNECTOR PIN-OUT
Verify the following:
CAUTION
!
When the battery is disconnected, the DSC will stop operating.
(The DSC OFF indicator will flash at this time, and the TCS/DSC indicator will illuminate)
Carry out the following procedure to reactivate DSC:
1. Turn the ignition switch to “OFF” and then turn it back to “ON”.
2. Turn the steering wheel clockwise as far as it will go, and then turn it back
counterclockwise as far as it will go.
3. Check that the TCS/DSC operation indicator is turned off.
4. Turn the ignition switch to “OFF” and then turn it back to “ON”.
5. Check that the TCS/DSC operation indicator is turned off. If the TCS/DSC operation
indicator is still illuminated or the DSC indicator is not turned off when the ignition
switch is turned back to “ON”, contact your Mazda dealer.
B+ harness wire (pin 10) is receiving
12V with ignition OFF.
3
6
1
0
Switched harness wire (pin 6) is
receiving 12V with ignition ON.
Ground wire is securely attached.
Harness is fully inserted into mirror.
Harness is not pinched, cut or
damaged.
FUNCTION
NOTE
PIN
1
2
GROUND
3
4
5
IGNITION
+12V SWITCHED
6
7
8
9
+12VDC
BATTERY
10
HOMELINK MIRROR
Demand
Lamps
10A
SJB
#43
10A
SMART
JUNCTION
BOX
+B
+IG
Y / G
B
B
3
10
6
B/W
GY
MY 2008
HOMELINK MIRROR
Demand
Lamps
10A
SJB
#41
10A
SMART
JUNCTION
BOX
+B
+IG
Y / G
B
B
3
10
6
B/W
L
MY 09
–
L
MY 2009
MY 2010
L
HOMELINK MIRROR
Demand
Lamps
10A
EC
Mirror
10A
SMART
JUNCTION
BOX
+B
+IG
Y / G
L
10
B
B
6
B/W
3
