77
2. OUTPUTS
9. AUX – (GREEN L.E.D.)
This is for a spare output to be programmed.
10. STEAM – (GREEN L.E.D.)
This light emitting diode (L.E.D.) will indicate the status of the steam
injection output. If the request to turn on the steam injection is made,
then the L.E.D. is ON.
11. _HEAT – (GREEN L.E.D.)
This L.E.D. will indicate the status of the heat output. If the request
to turn on the heater is made, then the L.E.D. is ON.
12. AIR – (GREEN L.E.D.)
This L.E.D. will indicate the status of the air jet output. If the request
to turn on the air jet is made, then the L.E.D. is ON.
13. REV – (GREEN L.E.D.)
This L.E.D. will indicate the status of the basket (tumbler) reverse
direction output. If the request to tumble the drum in the reverse
direction is made, then the L.E.D. is ON.
14. FWD – (GREEN L.E.D.)
This L.E.D. will indicate the status of the basket (tumbler) forward
direction output. If the request to tumble the drum in the forward
direction is made, then the L.E.D. is ON.
15. FAN – (GREEN L.E.D.)
This L.E.D. will indicate the status of the fan output. If the request
to turn on the fan (blower) is made, then the L.E.D. is ON.
Summary of Contents for PHASE 7.2
Page 86: ...113162 1 12 23 02 25...
