10
I. AUDIO ALERT ON TIMES 0 TO 10
The tone will sound at the end of the Cool Down Cycle to indicate that the cycle is complete. Programming
allows for the elimination of the tone during the Wrinkle Guard Cycle. This is done in “WRINKLE GUARD
SETUP.” Programming also allows the beeps to be set from 0 to 10 times in increments of one (1). This is done
in “DRYER SETUP.”
J. PREPROGRAMMED CYCLE PREVIEW
The parameters of the preprogrammed cycles can be displayed for verification. To view an “A-F” preset
program (parameter), simply press the “START/ENTER”
l
key and the desired preset program “A-F.” The
light emitting diode (L.E.D.) display will read the program parameter settings, then return to the “READY”
display mode. To view a “0-40” preset program parameter, simply press the “START/ENTER”
l
key and the
desired preset program number “0-40” followed by “START/ENTER”
l
key again. The L.E.D. display will
read the program parameter settings, then return to the “READY” display mode.
K. REVERSING OPTION
This feature helps reduce balling up or tangling of large items.
REVERSING OPTION SELECTIONS:
1. Reverse On or Reverse Off
2. This Is Set For Each Cycle
3. Basket (tumbler) Spin Time and Dwell (stop) Time
a. Fixed in the Automatic “AUTO” Mode and
cannot
be changed.
1) Spin Time - 2 minutes forward and 2 minutes reverse.
2) Dwell (stop) Time - 5-seconds.
b. Programmable in the Manual Mode.
1) Spin Time - Programmable from 30-seconds to 120-seconds in 1-second increments.
2) Dwell (stop) Time - Programmable from 5-seconds to 10-seconds in 1-second increments.
L. DIAGNOSTICS
The Phase 7 OPL, microprocessor controller (computer) monitors “Drying function,” which is the following:
1. Drying Functions: These include temperatures, burners, sail switches, blower, basket (tumbler), and lint
drawer.
Summary of Contents for PHASE 7.2
Page 86: ...113162 1 12 23 02 25...
