Maxwell MW-3044 B, Manual Instruction

Page: 11 / 32

11
ENGLISH
•
Never steam clothes on a person as the steam
temperature is very high, use a clothes hanger or
a coat rack.
•
After you finish ironing, switch the unit off, wait
until it cools down completely, then open the water
inlet lid (2), turn over the iron and pour out the
remaining water.
STEAM CHAMBER CLEANING
To prolong lifetime of the iron we recommend cleaning
the steam chamber regularly.
•
Set the continuous steam supply knob (3) to the
position
.
•
Fill the water tank (10) up to the maximal mark
«max».
•
Place the iron on its base (9).
•
Insert the power plug into the mains socket.
•
Set the control knob (11) to the maximum sole-
plate temperature «
max », the indicator (7) will
light up.
•
When the soleplate (13) reaches the desired tem-
perature value, the indicator (7) will go out, you
can start cleaning.
•
Switch the iron off setting the temperature control
knob (11) to the «min» position (SWITCHED OFF).
Remove the power plug from the mains socket.
•
Place the iron horizontally above the sink, set the
continuous steam supply knob (3) to the position
«self clean».
•
Boiling water and steam with scale will be released
from the iron soleplate (13) openings.
•
Slightly sway the iron back and forth, until all the
water leaves the water tank (10).
•
Release the continuous steam supply knob (3)
and set it to the position
.
•
Place the iron on its base (9) and let it cool down
completely.
•
When the soleplate (13) cools down completely,
wipe it with a dry cloth.
•
Before you take the iron away for storage, make
sure that there is no water in the water tank (10)
and that the iron soleplate (13) is completely dry.
CLEANING AND CARE
•
Before cleaning the iron, make sure that it is
unplugged and has cooled down completely.
•
Wipe the iron body with a slightly damp cloth and
then wipe it dry.
•
Scale on the iron soleplate can be removed with a
cloth soaked in vinegar-water solution.
•
After removing scale, polish the soleplate surface
with a dry cloth.
•
Do not use abrasives to clean the iron soleplate
and body.
•
Avoid contact of the iron soleplate with sharp
metal objects.
STORAGE
•
Set the temperature control knob (11) to the posi-
tion «min», and the continuous steam supply knob
(3) to the position
– continuous steam supply is
off. Remove the power plug from the mains socket.
•
Put the iron vertically and let it cool down com-
pletely.
•
Open the water inlet lid (2), turn over the iron and
drain any remaining water from the water tank (10).
•
Close the lid (2).
•
Store the iron vertically in a dry cool place out of
reach of children and disabled persons.
DELIVERY SET
Iron – 1 pc.
Beaker – 1 pc.
Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50/60 Hz
Maximum power: 1800 W
The manufacturer reserves the right to modify the
unit’s design and specifications without prior notice.
RECYCLING
For environment protection do not throw out the unit
and the batteries
with usual household waste after its service life expi-
ration; apply to the specialized center for further
recycling.
The waste generated during the disposal of the unit
is subject to mandatory collection and consequent
disposal in the prescribed manner.
For further information about recycling of this product
apply to a local municipal administration, a disposal
service or to the shop where you purchased this prod-
uct.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appliance
was purchased. The bill of sale or receipt must be
produced when making any claim under the terms of
this guarantee.
This product conforms to the EMC Directive
2014/30/EU and to the Low Voltage Directive
2014/35/EU.
IM MW-3044.indd 11 12/15/17 3:02 PM