ENGLISH
4
switch (5). And preliminary dry your hair. When the
hair is almost dry, set the concentrator attachment
(1), use the heating switch (4) to decrease the heat-
ing degree and air flow speed switch (5) to decrease
the air supply speed.
Divide your hair into locks and layers. Start from
lower layers. Use a plain or round comb, brushing the
hair downwards and direct hot air from the concen-
trator attachment at your hair. This way, straighten
each lock from the root till tips. When you strengthen
locks of the deeper layer, start strengthening locks of
the medium layer and finish the process by strength-
ening locks of the outer layer.
Natural wavy hair structure
Set the switch (4) to the low heating position (1), the
switch (5) to the 1
position, grip locks between fin-
gers, turn them to the side of natural waving and dry
them directing air between the fingers. When the re-
quired effect is achieved push the cool button (3) and
fix each lock.
Raise and volume
Use the hair–dryer at heat/speed modes from low to
high. Dry roots of hair beginning from the back of the
head.
Styling
Set the switches (4, 5) to the low heating/speed
position and set the concentrator attachment (1) to
direct air.
Divide your hair into locks and create a required style
of the hair by means of a round comb.
Direct air at hair at a required direction.
If necessary direct air at each lock during 2–5 sec-
onds to fix hair.
Styling time is determined individually based on
the hair type.
Cool shot supply
This model has a cool shot supply function for fixing
up your hair. Press and hold the cool shot supply but-
ton (3). It will let you keep the created style.
Protection from overheating
This hair-dryer has protection from overheating
which will switch off the hair-dryer if the outlet air is
too hot. If the hair–dryer stops working switch it off
by the switch (5) setting it to the “0” position, unplug
the hair-dryer, provide that the inlets and outlets are
unblocked and let the hair-dryer cool off for 5–10
minutes. After it you can switch it on. Do not block
the air openings during operation of the unit and
avoid getting of hair into the air inlet openings.
Cleaning and care
The hair-dryer is intended for household usage only.
We recommend removing the air inlet grid (2) pe-
•
riodically for cleaning.
Set the switch (5) to the “0” position and discon-
•
nect the hair-dryer.
Slightly press the ledges on the grid (2) and re-
•
move the grid. Clean the grid with a brush and
close it again.
The body of the hair-dryer can be cleaned with a
•
wet cloth. After it, it is necessary to wipe the body
dry.
Storage
Always unplug the hair-dryer if it is not being
•
used.
Never wind the cord around the hair-dryer. It
•
can cause damage of the hair-dryer. Do not pull,
overturn or strengthen the cord especially near
the plug and at the place where the hair-dryer is
fastened to the body. Periodically strengthen the
cord if it is overturned.
For easy storing there is a loop for hanging-up (6) on
•
the unit, you can keep the unit by means of this loop
provided that no water gets on the unit.
Keep the unit in a dry cool place, out of reach of
•
children.
Delivery set
1. Hair dryer – 1 pc.
2. Concentrator attachment – 1 pc.
3. Instruction manual – 1 pc.
Specifications
Power supply:
220–240V, 50Hz
Power:
2200 W
The manufacture preserves the right to change the
specifications of the unit without a preliminary noti-
fication.
Service life of the unit is 3 years
GUARANTEE
Details regarding guarantee conditions can be obtained
from the dealer from whom the appliance was purchased.
The bill of sale or receipt must be produced when making
any claim under the terms of this guarantee
This product conforms to the EMC-Requirements
as laid down by the Council Directive 89/336/
EEC and to the Low Voltage Regulation (73/23
EEC)
MW_2011_INSTRUKZ-2 vida.indd 4
MW_2011_INSTRUKZ-2 vida.indd 4
29.06.2011 16:37:12
29.06.2011 16:37:12
