TeraPac User Operation and Maintenance Guide
51
Figure 6-11
15) Remember that you can continue to use your TeraPac in the short term, but you should replace
the failed drives as soon as possible. Once you are ready to replace the failed drive, power
down your system, disconnect the TeraPac, lie it face down on the table, and remove the four
screws holding the back cover (Figure 6-12).
16) Lift the cover away to reveal a brass-colored retaining and protection plate (Figure 6-13).
Figure 6-12
Figure 6-13
17) Remove all of the screws attaching the brass-colored retaining and protection plate to the hard
disks and the rest of the chassis (Figure 6-14).
18) Stand the TeraPac up to provide full access to its internals (Figure 6-15).
