6
TeraPac User Operation and Maintenance Guide
Location and Power Requirements
Location
Your TeraPac unit needs to be positioned in a location with the capacity to safely support the main
MaxPac X-Class system plus least 26 lbs to 36 lbs depending on the TeraPac configuration. The
unit should be unobstructed so as to permit the free flow of cooling air through the intake and
exhaust vents.
Power Requirements
TeraPac X-Class power supplies are auto-sensing 100 to 240 VAC, 50 to 60Hz units. Ensure that the
supplied power is sufficient, stable, and without spikes or surges for operation of your TeraPac and
other required equipment.
Setting-Up Your TeraPac
Note:
The following discussions assume that your main MaxPac X-Class system is already equipped
with a MegaRAID card. However, if you purchased your TeraPac as a separate unit, you may need to
add a MegaRAID card to the MaxPac before proceeding with the rest of these instructions (see
Chapter 4 for more details).
1) Observe the two black knurled thumbscrews on either side of the case (Figure 2-4). Unscrew these
screws (Figure 2-5), pull the cover away from the main unit, and lay it on the desk (Figure 2-6).
Figure 2-5
Figure 2-6
