TeraPac User Operation and Maintenance Guide
23
Figure 4-16
26) Press the <F3? Key to see the logical drives, which will result in the
Logical Drives
Configured
dialog appearing on the screen (Figure 4-17).
Figure 4-17
27) In the case of our example configuration, logical drive 1 is the system disk with a RAID level of
0, while logical drive 2 is our TeraPac array with a RAID level of 5 (make a note of the
corresponding values on your system for future reference).
28) Now we wish to make sure that the system still plans to boot up off the main operating system
disk, so pPress the
<Esc>
key one or more times until you reach the
Configure
menu, then use
the
Up/Down
arrow keys to highlight the
Specify Bootable Logical Drive
item (Figure 4-18).
