manualshive.com logo in svg

MaxTronic Orion 410SR, User Manual

Share
Download
MaxTronic Orion 410SR User Manual Download Page 65

Maxtronic Orion 410SR User Guide

51

 

 

Stor

age

 Se

tu

p Settings

Storage Setup Settings

The Storage Setup menu allows the administra-
tor to configure various settings according to the 
disks and volumes installed.

The following information is displayed:

Disk Information:

•

Name

: Displays the name of the HDD.

•

Model

: Displays HDD model.

•

Capacity

: Displays the HDD capacity.

•

Status

: Displays storage volume location.

For more information related to an installed 
HDD, double-click ‘Disk name’. The following 
screen will appear:

•

• Maximum speed: Displays the maximum speed of the disk.

• The bad sector count feature allows a maximum of 512 blocks. When the count reaches 

384, the system will automatically notify the user. Once the count has reached the maxi-
mum of 512, the system will disable the hard disk.

All of the error counters information will be reset to zero following system 
reboot.

Once the bad sector count has reached 384, we strongly recommend 
replacing the hard disk immediately to prevent any data loss.

Summary of Contents for Orion 410SR









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands