MaxTronic Orion 410SR, User Manual

Page: 24 / 104

10
Maxtronic Orion 410SR User Guide
Mo
unting
in
a Ra
ck
Mounting in a Rack
When the disk array system is completely set up, it can be installed in a standard 19 inch rack.
Follow the instructions in this section to install the disk array system in a rack.
1. Clip eight rack unts supplied with your rack, into the rack, taking care that they corre-
spond with the mounting points on the rails.
2. Extend both of the rails so that they are the right length to fit in your rack.
3. Bolt the rails into the rack using the rack bolts supplied with your rack.
You will need four nuts and bolts (not include) for each rail; two at the front and two at the
back.
4. Tighten the locking screws when they are correct length.
5. Slide the disk array system into the rack and bolt it into place with the supplied fixing
screws.
Caution
This product is heavy. Attempting to install the NAS system in a rack by
yourself could result in injury or damage to the product.