manualshive.com logo in svg

MaxTronic Orion 410SR, User Manual

Share
Download
MaxTronic Orion 410SR User Manual Download Page 15

1

1 Introducing Orion 410SR

The Orion 410SR NAS System of MaxTronic International Co., Ltd. is a RAID-enabled NAS 
(Network Attached Storage) system. The Orion 410SR NAS System is able to conduct con-
tinual self-tests, beyond unsymmetrical fault tolerance, and comes with data validation func-
tions provided by RAID 0, RAID 1, RAID 3, and RAID 5. The availability of cooling fans 
and hot-swap features make the Orion 410SR with RAID function is more reliable and easier 
to use.

Product Features

•

Automatic detection of overheating, System fan speed and power supply DC voltage 
3.3V, 5V, and 12V

•

Automatic formatting, data synchronization and recovery

•

Firmware upgradeable

•

User-friendly configuration interface

•

OS-independent networking storage system

•

Hard disk drive error LED indicator

•

Supports hard disk drive hot-swapping

•

Supports one RJ45 ethernet port (10/100/1000)

•

Supports UPS devices via USB interface

•

System status and OS configuration display on front LCD screen

Summary of Contents for Orion 410SR









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands