MaxTronic Orion 410SR, User Manual

Page: 19 / 104

5
2 Getting Started
Hardware Installation
The basic hardware setup includes:
• Orion 410SR NAS System
• 4 hot-swappable caddies
• 1 power cord
• 1 network cable
• 1 set of keys
Power Connection
Use the power cord provided in the package
for proper power supply.
1. Connect the receptacle into the power
connector on the rear side of the
Orion 410SR.
2. Connect the three-pin power plug into a
power outlet.
Turn on the Power
Press the power switch at the rear side of the Orion 410SR.
Turn off the power
To shutdown the system properly, please use the “Shutdown” function in the administrator
tools via web browser.
Please refer to “Logging Out/Shutting Down” on page 82 for detailed information.
The optional model with redundant power supply for 410SR is available.
The power LED on front panel only applies to this option.
Do not turn off the power directly from the power source while the system
is still running or may encounter unexpected error.