15
Chapter 2 General Safety
Information
6-General Safety Instructions
1.Reflection Of Mirror
The location of the hand-held laser welder's output port may generate
a secondary laser beam that radiates outward at multiple angles. This
phenomenon that the main beam of the handheld laser welding machine
produces a divergent beam after being reflected on a plane is called specular
reflection. Although the energy of the secondary laser beam is much less than
that of the primary laser beam, this intensity can also cause damage to, for
example, human eyes, skin, or some material surfaces.
WARNING :
◎
Since the laser radiation is invisible, you must exercise extreme care to avoid
or reduce specular reflections.
2.Accessories Safety Instructions
The photosensitive elements integrated in the optical accessories related to the
hand-held laser welding machine may be damaged due to laser exposure, and
related device protection should be paid attention to.
WARNING :
◎
The output laser intensity of Maxphotonics handheld laser welding machine
is enough to weld metal, burn skin, clothing and paint, and ignite volatile
substances such as alcohol, gasoline, ether, etc. Therefore, during operation
and use, be sure to isolate the flammable items around the handheld laser
welding machine.
3.Optical Handling Precautions
Maxphotonics strongly recommends that you read the following operating
points before operating the handheld laser welding machine:
(1) Do not look directly at the light-emitting hole of the handheld laser welding
machine;
