26
Chapter 3 Product Description
Functional
Classification
Function
Description
Remark
Action button
Work switch
It is located at the upper right of the screen. The
orange button and the word standby are displayed
by default when the machine is turned on, which
means that it is in a standby state. In this state, the
working button of the tip does not work.
Click the button, it will be displayed in red + start
words, the machine will enter the working state,
and the button of operating the pipette tip can work
normally
Setting item
Laser power
0~100% adjustable, 100% power setting is the
nominal maximum power of the machine.
Scanning
frequency
Laser reciprocating scanning frequency, the
maximum scanning frequency is 220Hz under
full amplitude state, and the scanning frequency
can be increased correspondingly under small
amplitude.
Sweep amplitude 0~4mm adjustable.
Laser enabled
The working laser switch button is mainly used for
adjusting the machine, and other parameters are
adjusted when the laser is not in the state.
Numerical
state
Air pressure
Indicates the current shielding gas pressure.
Protective mirror
temperature
Indicates the current tip guard temperature.
Laser power
Indicates the current laser output power.
Enable state
Laser
Green: Laser firing, Gray: Standby
Red light
Green: red light is emitting, gray: standby
Blow air
Green: shielding gas output, gray: standby
Wire feed
Green: wire feeding, gray: standby
Gun tip
communication
Green: Communication, Gray: Standby
Security lock
Green: safety lock closed state, gray: safety lock
open state
Gun head switch
Green: the tip switch is pressed, gray: the tip
switch is not pressed
Proximity sensing
Green: Handheld tip detected, Grey: Handheld tip
not detected
