51
Chapter 6 Operation Guide
Wire feed nozzle 0.8-1.6mm
Welding copper nozzle
Wire feeding speed adjustment: turn on the wire feeding switch on the
touch screen, turn off the laser enable, press and hold the hand-held welding
head switch, adjust the wire feeding speed at low speed (about 10mm/s),
and turn left and right according to the tightness of the wire feeding The two
adjustable preload pressure rods turn the sleeve until the wire reel rotates at a
constant speed (make sure that the wire feeding tube is smooth and cannot be
bent).
Choose the right wire feeder and welding tip
