MaxPac Single/Dual/Triple-Screen 8230 Training and Maintenance Guide
37
Figure 4-14
Figure 4-15
10) Use a Philips #1 screwdriver to remove the two screws attaching the over-molded DVI data cable
connector to the graphics board (Figure 4-16) and gently pull the connector a little way from the
system (Figure 4-17).
Figure 4-16
Figure 4-17
11) Use a Phillips #2 screwdriver to remove the two 6-32 screws attaching the access plate – and the
special linking bracket – to the inner chassis (Figure 4-18).
Figure 4-18
Figure 4-19
12) Lift the linking bracket away from the system (Figure 4-19) then lift the access plate away from
the chassis (Figure 4-20).
Summary of Contents for Dual-Screen 8230
Page 6: ......