82
MaxPac Single/Dual/Triple-Screen 8230 Training and Maintenance Guide
13) Take the new power distribution assembly supplied by MaxVision support and incorporate it into
the system by performing the steps described above in reverse order.
Hard Drive Magazine (also Individual Hard Drives)
1) Undo the knurled screw holding the middle binding bar (Figure 5-63) and then remove the binding
bar (Figure 5-64).
Figure 5-63
Figure 5-64
2) Gently pull on the magazine handle to extract the magazine from the inner chassis (Figure 5-65).
Figure 5-65
Figure 5-66
3) In order to replace an individual drive, turn each of the four knurled screws attached to the upper
binding bar until they pop out and then remove the upper binding bar (Figure 5-66). Note that the
upper binding bar has tabs that are inserted into slots of the main drive cage.
Summary of Contents for Dual-Screen 8230
Page 6: ......
