90
MaxPac Single/Dual/Triple-Screen 8230 Training and Maintenance Guide
Figure 5-98
Figure 5-99
5) Cut any cable ties that are holding the display power and data cables in place as shown in figures
5-96 through 5-98
6) Remove the 3 video data cables for the slot leading to the exterior of the left side of the chassis.
The triple-screen MaxPac 8230 XRA3 is shown in figure 5-99
Figure 5-100
Figure 5-101
7) Use a Phillips #1 screwdriver to remove the three 4-40 screws holding the wire harness protector
plate (Figure 5-100), then gently remove the protector plate to expose the soft power and right
speaker cables (Figure 5-101).
Figure 5-102
Summary of Contents for Dual-Screen 8230
Page 6: ......