Maxon MXT-25, Maintenance Manual

Page: 55 / 61

1
1921 Slauson
A
ve. Santa Fe Springs, CA. 90670 (800) 227-41
16 F
AX (888) 771-7713
55
3.
Suport the platform to prevent it from drop-
ping. Remove solenoid valve
(FIG. 55-1)
.
Ensure the valve operates with a smooth
spring-loaded action
(FIG. 55-2)
. Check for
debris inside the valve. If necessary, clean
or replace the cartridge valve. Reinstall
cartridge valve (if good) or install a replace-
ment.
REMOVING SOLENOID VALVE
FIG. 55-1
COIL
NUT
VALVE
CARTRIDGE
VALVE CARTRIDGE
1/8”
CHECKING SOLENOID VALVE
FIG. 55-2
Keep dirt, water and other contaminants from entering the hydraulic system.
Before opening the hydraulic fl uid reservoir fi ller cap, drain plug and hydraulic
lines, clean up contaminants that can get in the openings. Also, protect the
openings from accidental contamination during maintenance.
CAUTION
4.
Unbolt and remove pump cover
(FIG. 55-3)
.
UNBOLTING PUMP COVER
FIG. 55-3
CAP SCREW,
5/16”-18
(2 PLACES)
COVER
BRACKET
(2 PLACES)
FLAT WASHER,
5/16”
(2 PLACES)
NYLON NUT,
5/16”-18
(2 PLACES)
PUMP COVER
POWER UNIT
(REF)