Maxon MXT-25, Maintenance Manual

Page: 17 / 61

1
1921 Slauson
A
ve. Santa Fe Springs, CA. 90670 (800) 227-41
16 F
AX (888) 771-7713
17
3.
Lower the platform all the way to the ground
while draining the remaining hydraulic fl uid.
5.
Remove fi ller cap
(FIG. 14-2)
.
Add 1 gallon of hydraulic fl uid to reservoir.
Re-install fi ller cap.
CAUTION
Pump cover must be correctly se-
cured to prevent it from becoming
a hazard. To secure pump cover,
the holder fl ats must butt against
pump cover as shown in the il-
lustration.
7.
Bolt on the pump cover as shown
in
FIG. 17-1
. Torque the 5/16”-18
cover bolts from
10 to 14 lb-in
.
6.
Stow the Lift and do the
CHECKING
HYDRAULIC FLUID
procedure in this
section of the manual.
BOLTING ON PUMP COVER
FIG. 17-1
4.
Reinstall drain plug
(FIG. 14-2)
.
CAP SCREW,
5/16”-18
(2 PLACES)
COVER
BRACKET
(2 PLACES)
FLAT WASHER,
5/16”
(2 PLACES)
NYLON NUT,
5/16”-18
(2 PLACES)
PUMP COVER
POWER UNIT
(REF)