Maxon MXT-25, Maintenance Manual

Page: 22 / 61

1
1921 Slauson
A
ve. Santa Fe Springs, CA. 90670 (800) 227-41
16 F
AX (888) 771-7713
22 22
PERIODIC MAINTENANCE
PLATFORM ADJUSTMENT
NOTE:
Before doing the following procedures, make sure vehicle
is parked on level ground.
ADJUSTING PLATFORM (IF TOO HIGH)
(RH ADJUSTMENT BOLT SHOWN)
FIG. 22-2
PLATFORM EDGE AT OR ABOVE BED LEVEL
FIG. 22-1
1.
With the platform and fl ipover unfolded, raise platform to bed level
(FIG. 22-1)
. Measure how much the outboard edge of platform
rises above fl oor level
(FIG. 22-1)
. The outboard edge must be 1/2”
to 2” above fl oor level
(FIG. 22-1)
. If indication is correct, Liftgate
is installed correctly and no adjustment is needed. If the outboard
edge is more than 2” above
fl oor level, turn both RH and LH plat-
form adjustment bolts counter-clockwise until the platform edge is
within speci
fi cation
(FIG. 22-2).
LEVEL LINE
VEHICLE
FLOOR (REF)
EXTENSION
PLATE (REF)
OUTBOARD EDGE LEVEL
1/2” to 2” MAX
ADJUSTMENT
BOLT
PLATFORM TORSION
SPRING
(REF)