1
1921 Slauson
A
ve. Santa Fe Springs, CA. 90670 (800) 227-41
16 F
AX (888) 771-7713
59
CAUTION
!
To prevent injury, unfold platform
before repositioning opener.
PLATFORM LOWERED FROM STOWED
POSITION (RH SIDE VIEW)
FIG. 59-1
1.
The
MAXON-recommended
proce-
dure for repositioning the opener is
as follows. Lower the platform from
stowed position
(FIG. 59-1)
.
2.
Unfold the platform
(FIG. 59-2)
.
UNFOLDING PLATFORM
FIG. 59-2
NOTE:
The platform must always stow and unfold without hitting underside of vehicle.
Platform should unfold as close as possible to position shown in
FIG.
59-1
,
but must never be positioned so it falls open.
PLATFORM
3.
Unfold the
fl
ipover
(FIG. 59-3)
.
UNFOLDING FLIPOVER
FIG. 59-3
4.
Measure vehicle bed height.
Then move the opener, as
required, to the matching bed
height position for your Liftgate
as shown in
FIG. 60-1B
and
FIG. 61-1B
.
FLIPOVER
STEP 14 - ADJUST OPENER (IF REQUIRED)
PLATFORM
SHACKLES
TOUCHING
THE GROUND
Summary of Contents for GPTLR-25
Page 90: ......
