1
1921 Slauson
A
ve. Santa Fe Springs, CA. 90670 (800) 227-41
16 F
AX (888) 771-7713
53
STEP 11 - ADJUST PLATFORM (IF REQUIRED)
- Continued
12.
Measure distance
“C”
from
the tip of the
fl
ipover to ground
level
(FIG. 53-1)
. Next, subtract
the distance
“B”
measured
in instruction 6. The result is
distance
“D”
for the platform
adjustment
(FIG. 53-3)
. For ex-
ample, if you measured 50” for
“C”
and 1” for
“B”
, the calculat-
ed distance
“D”
for the platform
adjustment is 49”.
14.
Raise or lower the
fl
oor
jack to adjust distance
“D”
between tip of
fl
ipover and
ground level
(FIG. 53-3)
.
Use the distance
“D”
cal-
culated in instruction 12.
13.
Remove welds from RH side
and LH side mounting plates
(FIG. 53-2)
.
LIFTGATE CLEARANCE DIMENSIONS
FIG. 53-1
REMOVING WELDS FROM MOUNTING PLATE
(RH SIDE SHOWN)
FIG. 53-2
“C”
LIFTGATE CLEARANCE DIMENSIONS
FIG. 53-3
“D”
REMOVE WELDS
MOUNTING
PLATE
MAIN FRAME
(CUT-AWAY VIEW)
VEHICLE FRAME
(TYPICAL TRUCK
FRAME SHOWN)
Summary of Contents for GPTLR-25
Page 90: ......
