Maxon GPC 22 X1, Installation Manual

Page: 8 / 48

Installation manual Liftgate GPC 22 X-1, Series 11
Document no.: S 20 912 436 8 Version 2021
Installation Directions GPC 22 X-1
Installation-Safety Precautions
 Before installing, the battery of the vehicle needs to be disconnected.

The vehicle needs to be secured against all unintentional shifting.
 The plugs for electronic systems as for example ABS needs to be pulled before welding.
Fuel lines, air hoses of the brake system, and cables in the installation area need to be
protected against damages.
 Any special safety regulations (if applicable) need to be complied with.

Safety gear, like protective goggles, work gloves and work boots, need to be made
available before installing and are to be used if necessary.

Safety devices on cranes, forklifts, and other lifting gear necessary for installing are to be
checked to see if they are in proper working condition before they are used.
CAUTION
Unsuitable transport equipment
When transporting and lifting heavy parts, use transport equipment (e.g. cranes,
pallet trucks, or other lifting gear) with a sufficient load carrying capacity.
 Verify the correct and reliable functioning of the transport equipment.
Unpacking the lifting gear, installation adapters, and accessories kit
CAUTION
Unsecured, heavy parts
When transport locks are removed, parts may fall or tip over and the platform may tip
over. Risk of injury.
 Secure loose parts. Remove transport locks carefully.
 After disposing of packing materials, store all parts in a secured manner.
NOTICE
Oil leakage
Incorrect positioning of the lifting gear can result in oil leakage. Risk of environmental
damage.

Always transport the lifting gear in an upright position using suitable lifting
points.
IMPORTANT
Dispose of all packing materials in accordance with environmental regulations.