Installation manual
Liftgate GPC 22 X-1, Series 11
Document no.: S 20 912 436
24
Version 2021
Adjustment of the platform to the vehicle bed
Move the lifting gear with the opened platform hydraulically behind the body sill. For the
adjustment, the lift arms must not touch the body sill. Between the rear frame and lift arms, there
should be a space of 3/8” between the body sill and the lift arms. With the adjusting bolts, the
lifting gear will be adjusted until the rear frame and the platform are parallel. After the adjustment,
both bolts of the synchronizer bar fastening are to be tightened.
Adjustment of the platform for installation in a closed position:
Close the platform hydraulically. The cylinder needs to reach its end position when the platform
slightly touches the body sill or is set at 90° against the bed of the vehicle. Now rotate the rod
eye one more turn out of the cylinder rod; secure it. Now the platform can properly close the
body.
1. the piston rod head turn out,
platform closures the body.
2. one turn more, now the platform
can properly close the body.
C
C
Summary of Contents for GPC 22 X1
Page 2: ......
